Rage Against the Machine · settings for Epiphone Les Paul Standard + Marshall JCM800 2203
No effects needed for this part.
Your 2203 is the same Marshall family as Morello's 2205, so the core crunch is already there. Use the High input, neck ProBucker with volume slightly backed off, mids pushed hard, and let the amp do all the distortion.
The opening sustained chord loses its signature swirling sweep.
Workaround: Play the chord dry and lean on vibrato and volume swell for movement.
No clean level lift for lead passages.
Workaround: Turn the master up slightly and use guitar volume for dynamics.
No two-octave-up squeal dives.
Workaround: Use harmonics plus aggressive bends near the bridge for similar shrieks.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Neck single-coil for the main riff
1982 Fender Telecaster (neck pickup, drop D) → Marshall JCM800 2205 boost channel input → FX loop: Ibanez DFL Flanger → FX loop: DOD FX40B EQ boost → FX loop: DigiTech Whammy WH-1 (solo only) → Peavey 4x12 with Celestion G12K-85
Amp effects: reverb (The JCM800 2205 has onboard spring reverb; Morello's documented setting is about 7, though live FOH ambience dominates)
The notes are simple; the challenge is groove, muting accuracy and dynamic control between the quiet and full-gain passages.
Every song already dialed in for the Marshall JCM800 2203.
Marshall JCM800 2203 settings