Rage Against the Machine · settings for Epiphone Les Paul Standard + Neural DSP Quad Cortex (direct)
Fast release. Keeps gaps silent.
Rate slow, depth wide, feedback ~40%, mix 40% — engage only for the opening sustained chord.
Flat with +2 dB output for lead lifts. Slight 300 Hz cut if muddy.
Mic SM57, 1-2 inch, off-axis, low cut 80 Hz, high cut 7 kHz.
Short decay — dry arena feel.
Quad Cortex direct: Brit 800 model with a 4x12 IR for the JCM800 boost-channel crunch. Neck ProBucker, coil-split if you want closer single-coil thump. Flanger before the amp for the opening sustained chord, light spring reverb, gate for the silences.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Neck single-coil for the main riff
1982 Fender Telecaster (neck pickup, drop D) → Marshall JCM800 2205 boost channel input → FX loop: Ibanez DFL Flanger → FX loop: DOD FX40B EQ boost → FX loop: DigiTech Whammy WH-1 (solo only) → Peavey 4x12 with Celestion G12K-85
Amp effects: reverb (The JCM800 2205 has onboard spring reverb; Morello's documented setting is about 7, though live FOH ambience dominates)
The notes are simple; the challenge is groove, muting accuracy and dynamic control between the quiet and full-gain passages.
Every song already dialed in for the Neural DSP Quad Cortex.
Neural DSP Quad Cortex presets