TOOL · settings for Epiphone Les Paul Standard + Fender '65 Twin Reverb Reissue
At zero: Bright switch · Tremolo Speed · Tremolo Intensity
Pneuma's riff needs thick high-gain saturation; the Twin Reverb is a clean platform with no drive pedals owned. Dial a loud, mid-forward clean on the Vibrato channel, bridge ProBucker full up, and accept a gritty edge-of-breakup tone until a distortion pedal is added.
Without a drive pedal the riff has no saturation or sustain; the Twin stays clean even at gig volume.
Workaround: Run volume 7+ with bridge humbucker full up and pick hard for edge-of-breakup grit; palm-mute heavily so notes read as aggressive rather than clean.
Loses the rhythmic quarter-note shimmer that opens space between the riff's syncopations.
Workaround: Play the riff tightly to the pulse and let the amp reverb at 2 add minimal tail.
No front-end tightening or EQ shaping before the amp.
Workaround: Use amp middle at 8 and bass at 4.5 to mimic the boost's EQ curve.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: bridge humbucker
Gibson Les Paul Custom Silverburst (bridge humbucker) → MXR Micro Amp + (front-end boost/EQ) → Boss DD-3 Digital Delay → Signal split to Diezel VH4 / Marshall Super Bass / Bogner Uberschall + Rivera Knucklehead → Mesa 4x12 and Marshall 4x12 (V30s or Greenbacks) → Leslie cabinet mic'd in stereo
The notes are not technically extreme, but locking the syncopated drop-D figure to Danny Carey's shifting subdivisions and keeping mute control clean is the real challenge.
Every song already dialed in for the Fender '65 Twin Reverb Reissue.
Fender '65 Twin Reverb Reissue settings