Van Halen · settings for Epiphone Les Paul Standard + Fender Frontman 10G
No effects needed for this part.
Brown sound on a 10W starter amp: bridge ProBucker, Overdrive engaged, gain high, treble up to fake the Plexi presence. No phaser or tape echo available, so you get the raw cranked-Marshall character only, drier and smaller.
Loses the slow swirl that thickens the tapping section.
Workaround: Nothing onboard; use slight pick-hand vibrato and volume swells for movement.
No short tape slapback, preamp push, or end-of-track pitch dive.
Workaround: Play the final harmonic with a slow whammy-style bend; accept dry tone.
Closing low Eb harmonic lacks the warbling growl.
Workaround: Add heavy vibrato bar wobble on the final note.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Single bridge humbucker (only pickup on the guitar)
Frankenstrat (rewound Gibson PAF) → MXR M-117 Flanger (likely off) → MXR Phase 90 → Maestro Echoplex EP-3 → Univox EC-80A tape echo → 1968 Marshall 1959 Super Lead 100W (variac-fed) → Marshall 4x12 with Celestion Greenbacks → Sunset Sound echo chamber/plate (mix)
The signature tapped arpeggios, dive bombs and picked bursts demand elite technique, and the tone relies on extreme amp volume and feedback control rather than pedals.
Every song already dialed in for the Fender Frontman 10G.
Fender Frontman 10G settings