Van Halen · settings for Epiphone Les Paul Standard + Positive Grid Spark 40
Phaser model, rate ~0.6 Hz, depth 40%, mix 40%.
Tape/analog echo, ~250 ms, 3 repeats, mix low.
Plate or room, mix ~15%, short decay.
Threshold low, just enough to kill hiss.
Spark 40 on Crunch (Plexi model) pushed hard, bridge ProBucker full up, slow script phaser in the app and a short tape slapback. A 40W modeling amp won't feed back like a cranked Plexi, but the brown-sound midrange and saturation are reachable.
The closing low Eb harmonic loses its warbly, motor-modified tape grind.
Workaround: Add extra mod depth and lean on whammy-free pitch bends plus volume swell for the ending.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Single bridge humbucker (only pickup on the guitar)
Frankenstrat (rewound Gibson PAF) → MXR M-117 Flanger (likely off) → MXR Phase 90 → Maestro Echoplex EP-3 → Univox EC-80A tape echo → 1968 Marshall 1959 Super Lead 100W (variac-fed) → Marshall 4x12 with Celestion Greenbacks → Sunset Sound echo chamber/plate (mix)
The signature tapped arpeggios, dive bombs and picked bursts demand elite technique, and the tone relies on extreme amp volume and feedback control rather than pedals.
Every song already dialed in for the Positive Grid Spark 40.
Positive Grid Spark 40 settings