Van Halen · settings for Epiphone Les Paul Standard + Marshall DSL40CR
At zero: Gain · Volume
2 of 10.
Brown-sound approximation: Classic Gain channel in Crunch with the gain nearly maxed gives the cranked-Plexi voice. Bridge ProBucker full up, mids forward, presence high. No phaser or tape echo available, so the core is raw amp saturation.
Loses the slow swirl that thickens the tapping section
Workaround: Play it dry; add vibrato and pick-attack variation for movement
No tape slapback or preamp thickening; dry, less three-dimensional
Workaround: Lean on the amp reverb at low level for a touch of space
Final low harmonic lacks the warbling tape growl
Workaround: Use whammy-free pitch bends and let the note feed back naturally
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Single bridge humbucker (only pickup on the guitar)
Frankenstrat (rewound Gibson PAF) → MXR M-117 Flanger (likely off) → MXR Phase 90 → Maestro Echoplex EP-3 → Univox EC-80A tape echo → 1968 Marshall 1959 Super Lead 100W (variac-fed) → Marshall 4x12 with Celestion Greenbacks → Sunset Sound echo chamber/plate (mix)
The signature tapped arpeggios, dive bombs and picked bursts demand elite technique, and the tone relies on extreme amp volume and feedback control rather than pedals.
Every song already dialed in for the Marshall DSL40CR.
Marshall DSL40CR settings